hero-image-min.jpg

ROOFING

MEMBRANE

FOUNDATION

MEMBRANE

SB 100 (SPRAY GRADE)

SB-100 is an environmentally friendly, elastomeric bitumen emulsion and the basis for a high performance, cost efficient liquid applied roof waterproofing membrane. Spray applied in combination with an inorganic rapid set accelerator, SB-100 instantly forms a rubberized, fully adhered waterproof membrane for new and restoration roofing projects.

SB-100 is applied using the HVLP 2000, a dual diaphragm pump system that is easy to use and has been specifically designed by SBH SEAL LLC. SB-100 is sprayed concurrently with an inorganic salt solution that transforms the product as a liquid into a seamless rubberized membrane as it contacts with the roof deck surface.

SB-100 spray on liquid membrane fully cures in less than 24 hours but is waterproof instantly! Thus protecting your building from the rain and water infiltration.

Cold applied directly to surface with minimal prep, at any thickness

Can be applied to complex irregular penetrations without joints

100% VOC free, solvent free, non-hazmat, water-based

Fully adhered to avoid water tracking or water buildup under surface

Uses include: roofing, foundations, under-slab, blindside and lagging

Over 138' (42m) resistance to hydrostatic head water pressure

Highly weather resistant to UV, freeze and thaw, solar oxidation

Excellent chemical resistance properties for containment protection

Highly elastomeric ( > 1,332% ) for concrete crack bridging

Monolithic and seamless, can be installed around obstacles with ease

Applied at 4 to 6 times the coating thickness of competing technologies

RELEVANT DOCUMENTS

SB 200 (BRUSH GRADE)

SB-200 is a single-component, liquid applied waterproofing sealant combining high quality bitumen with various polymers that forms a high-performance elastomeric waterproof membrane. Containing no solvents, SB-200 Waterproof Sealant is non-flammable and the coating will not damage polyurethane or polystyrene insulation materials. A variety of different reinforcing fabrics can be imbedded into the membrane to produce a high strength, superior waterproofing layer.

SB-200 is applied using a brush, roller or single component sprayer to provide a seamless and fully adhered membrane to most substrates. This all-purpose waterproofing sealant is designed for multiple surfaces including roofing materials and concrete as well sealing cracks, joins and flashings.

At 25°C and 50% relative humidity, SB-200 fully cures in 24-48 hours. Curing time increases in colder temperatures or higher humidity so environmental conditions must be considered before application.

Cold applied directly to surface with minimal prep, at any thickness

Can be applied to complex irregular penetrations without joints

100% VOC free, solvent free, non-hazmat, water-based

Fully adhered to avoid water tracking or water buildup under surface

Uses include: roofing, foundations, under-slab, blindside and lagging

Over 138' (42m) resistance to hydrostatic head water pressure

Highly weather resistant to UV, freeze and thaw, solar oxidation

Excellent chemical resistance properties for containment protection

Highly elastomeric ( > 1,332% ) for concrete crack bridging

Monolithic and seamless, can be installed around obstacles with ease

Applied at 4 to 6 times the coating thickness of competing technologies

RELEVANT DOCUMENTS

SB-HD (Heavy Duty)

SB-200 is a single-component, liquid applied waterproofing sealant combining high quality bitumen with various polymers that forms a high-performance elastomeric waterproof membrane. Containing no solvents, SB-200 Waterproof Sealant is non-flammable and the coating will not damage polyurethane or polystyrene insulation materials. A variety of different reinforcing fabrics can be imbedded into the membrane to produce a high strength, superior waterproofing layer.

SB-200 is applied using a brush, roller or single component sprayer to provide a seamless and fully adhered membrane to most substrates. This all-purpose waterproofing sealant is designed for multiple surfaces including roofing materials and concrete as well sealing cracks, joins and flashings.

At 25°C and 50% relative humidity, SB-200 fully cures in 24-48 hours. Curing time increases in colder temperatures or higher humidity so environmental conditions must be considered before application.

Cold applied directly to surface with minimal prep, at any thickness

Can be applied to complex irregular penetrations without joints

100% VOC free, solvent free, non-hazmat, water-based

Fully adhered to avoid water tracking or water buildup under surface

Uses include: roofing, foundations, under-slab, blindside and lagging

Over 138' (42m) resistance to hydrostatic head water pressure

Highly weather resistant to UV, freeze and thaw, solar oxidation

Excellent chemical resistance properties for containment protection

Highly elastomeric ( > 1,332% ) for concrete crack bridging

Monolithic and seamless, can be installed around obstacles with ease

Applied at 4 to 6 times the coating thickness of competing technologies

RELEVANT DOCUMENTS

SPRAY ON / BRUSH ON GALLERY

INSTALLATION INSTRUCTIONS

DEMONSTRATION

SBH Seal

Products

Pros & Stores

Head Office

SBH Seal provides innovative seamless elastomeric membrane systems.

SBH Seal products and equipment

guarantees the best cost/benefit ratio

compared to conventional membrane systems.

RECOMMENDED INSTALLERS

We have a network of trusted independent Recommanded Installers located across the country.

© 2020 by SBH Seal LLC.