hero-image-min.jpg

SPRAY ON

LIQUID MEMBRANE

BRUSH ON

LIQUID MEMBRANE

WATERPROOF

FOUNDATIONS WITH SBH GUARD

SBH Guard provides an innovative seamless elastomeric foundation waterproofing membrane system. SBH Guard products and equipment guarantees the best cost/benefit ratio compared to conventional BELOW GRADE foundation membrane systems.

Cold applied directly to surface with minimal prep, at any thickness

Can be applied to complex irregular penetrations without joints

100% VOC free, solvent free, non-hazmat, water-based

Fully adhered to avoid water tracking or water buildup under surface

Uses include: roofing, foundations, under-slab, blindside and lagging

Over 138' (42m) resistance to hydrostatic head water pressure

Highly weather resistant to UV, freeze and thaw, solar oxidation

Excellent chemical resistance properties for containment protection

Highly elastomeric ( > 1,332% ) for concrete crack bridging

Monolithic and seamless, can be installed around obstacles with ease

Applied at 4 to 6 times the coating thickness of competing technologies

ELASTOMERIC LIQUID MEMBRANE

COATING FOR WATERPROOFING FOUNDATIONS

There is a huge transformation happening in the foundation waterproofing membrane market, our mission is simply to provide an environmentally friendly membrane system at an affordable price.

Designed to be a seamless monolithic highly rubberized membrane system, your foundation will be completely waterproofed post application. After proper cleaning and preparation of the wall it can be installed directly on the concrete and built up to your desired thickness. SBG Guard can be sprayed on or brushed on and is ideally suited to resolve situations with hydrostatic pressure against the foundation wall. SBH Seal installations require no invasive perforations in the structure and completely bonds to the concrete foundation wall avoiding water tracking and potential water buildup between the membrane and concrete. SBH Guard also "bridges" cracks or gaps and can easily be applied around complex penetrations and pipes.

SBH Guard liquid membrane has a high degree of elasticity and adhesion, it does not crack or break away from the concrete during extreme cold and harsh winter conditions.

The elastomeric liquid coating is applied directly to concrete or metal with no primers and with minimal surface preparation. There is no blasting or grinding required and green concrete is acceptable. Unlike epoxy or polyurethane, SBH Guard is applied in a single coat at any desired thickness and requires no reinforcing mesh layer, minimal prep and is extremely surface tolerant. Industrial applications include chemical containment (salts, acids, sea water, fertilizers), long-term corrosion prevention (direct to metal) and tank lining (concrete or metal)

DEMONSTRATION

SPRAY APPLIED
FOUNDATION LIQUID MEMBRANE

SBH Guard Spray is an eco-friendly, elastomeric water-based coating that combines a unique bitumenemulsion with certain polymers to create a high performance, cost-efficient liquid applied roof waterproofing membrane.

Spray applied in combination with an inorganic rapid set accelerator, SBH SeaI Spray instantly forms a rubber-like,fuIIy adhered waterproof membrane for new and restoration roofing projects. Lorem ipsum dolor sit amet, consectetur adip isicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut.

BRUSH APPLIED
FOUNDATION LIQUID

MEMBRANE

Repairs to EPDM, TPO membrane roofs on commercial buildings. The weak point of TPO and EPDM membranes are their seams; Both these types of flat roofing systems are installed by gluing them down or mechanically fastening them. it is this connection point and punctures that are typically the point of failure.

Using our primer and synthetic mesh, a team of SBH Seal installers can save your investment by reinforcing the joints with our SBH-200 Brush on liquid membrane saving tens of thousands of dollars in replacement costs.

FUNDATION PRODUCTS

Select the right product for your roofing or foundation project. SBH Seal and SBH Guard have preparation required, make sure to read our technical documentation to know when to use reinforcing mesh for seams or royal primer for TPO and EPDM groundwork.

TPO/EPDM PRIMER

SELF ADHESIVE MESH

REINFORCING MESH

WHITE

COATING

SBH Seal

Products

Pros & Stores

Head Office

SBH Seal provides innovative seamless elastomeric membrane systems.

SBH Seal products and equipment

guarantees the best cost/benefit ratio

compared to conventional membrane systems.

RECOMMENDED INSTALLERS

We have a network of trusted independent Recommanded Installers located across the country.

© 2020 by SBH Seal LLC.